Recommended wall mount for Echo Dot v3

[Jerome]

Hi all,
Any recommended wall mount for the Echo Dot v3 ?
(so that it's vertical I mean, such as the Dottie for my Echo Dot v2)
thx
Jerome

[AlanH]

Something like this?
https://www.amazon.com/New-TotalMount-Hole-Free-Mount-Eliminates/dp/B07JBHCBMD

[Jerome]

Something like this?
https://www.amazon.com/New-TotalMount-Hole-Free-Mount-Eliminates/dp/B07JBHCBMD

I had seen that one indeed.
They don't show how it looks once plugged though 
And I was thinking more of something holding thanks to the power outlet (like the Dottie) instead of the sticky pads which I don't trust too much...

[fstbusa]

I like the look of this one but haven't tried it.
https://www.amazon.com/gp/product/B077T42FZY/ref=ox_sc_saved_title_1?smid=A1E0JORIPU1OBX&psc=1


I have this one and like it.
https://www.amazon.com/This-Dottie-Plug-Generation-Engineered/dp/B074P3GKV3/ref=sr_1_cc_6?s=aps&ie=UTF8&qid=1542374800&sr=1-6-catcorr&keywords=amazon+dot+wall+mount

[Jerome]

I went with that one (there was not much choice for 3rd gen anyway on the French site)
https://www.amazon.fr/dp/B07JKM6DZJ/ref=cm_sw_r_em_apa_koM9BbM8RHFBF
The whole thing looks fine but it's pretty massive compared to the Echo Dot 2 + wall mount.
I have mine hanging up (ie Echo Dot is above the socket)
Due to the weight of the Dot 3 and probably the shape of the socket, the whole installation slightly tilts forwards.
I had to insert a discrete tiny piece of cardboard below the base to set the mount perfectly vertical.
You might not face this issue if you plug it with the Echo Dot below the socket.
Your mileage may vary depending on the shape of you socket too.

[renegade600]

Something like this?
https://www.amazon.com/New-TotalMount-Hole-Free-Mount-Eliminates/dp/B07JBHCBMD

I had seen that one indeed.
They don't show how it looks once plugged though 
And I was thinking more of something holding thanks to the power outlet (like the Dottie) instead of the sticky pads which I don't trust too much...

there are pictures that shows it on the wall.  also look like there are a couple of screw holes so you don't have to use the sticky pads except to hold it in place till you screw it on. 

it addition there are many holders for the third generation dot on amazon that shows it below the outlet but I did not see any over.   if you are good with a screwdriver, you can always turn the outlet upside down so the dot will be above.

[jcboluda]

which is the problem we want to solve with the wall mount?

[renegade600]

which is the problem we want to solve with the wall mount?

your post is not clear as to what you are asking, please clarify.

[Jerome]

which is the problem we want to solve with the wall mount?

Clear the kitchen countertop for instance.