Get CPR certified in 30 minutes at CPR Test Center.
Echo & Alexa Forums

Cheapest way to connect speakers?

0 Members and 1 Guest are viewing this topic.

newage_lightbulb

Cheapest way to connect speakers?
« on: February 10, 2019, 02:30:05 am »
Hello, I have a few Echo Dots and I use them as Bluetooth receivers (or just streaming my Amazon Prime music). I would like to connect speakers to them, and being cheap I would like to re-use some old speakers I have. But the old speakers just have the exposed wire connections that you generally plug into the back of an amplifier (where they generally clip in), whereas the Dots obviously have the 3.5mm connection.

Can anyone give some advice as to the cheapest piece of middle equipment I could use that would accept a 3.5mm plug as input and output to 2-4 speakers with the old standard clip connectors? Not looking for anything fancy like Bluetooth receivers as the Dot already handles that ... just need something that will drive the speakers and possibly be able to boost the volume.

Thanks!

Re: Cheapest way to connect speakers?
« Reply #1 on: February 10, 2019, 03:44:35 am »
you could always try splicing the two different wires together and plug into the echo.  if it don't work, you are only out of the audio cable. 

AlanH

Re: Cheapest way to connect speakers?
« Reply #2 on: February 10, 2019, 05:11:46 am »
If you're talking about non-powered, hi-fi speakers then you're going to need a pre-amp/amp to power them. I doubt if the output from a Dot would be sufficient to drive them. Can you plug your Dot into your hi-fi amp, assuming you still have one?

newage_lightbulb

Re: Cheapest way to connect speakers?
« Reply #3 on: February 10, 2019, 01:14:28 pm »
If you're talking about non-powered, hi-fi speakers then you're going to need a pre-amp/amp to power them. I doubt if the output from a Dot would be sufficient to drive them. Can you plug your Dot into your hi-fi amp, assuming you still have one?

Yeah that's the type: non-powered speakers. Generally they would plug/clip into the back of a powered hi-fi amp.

I'm sure I could run the 3.5mm plug of the Dot into such an amp, if I owned one, but I haven't had one in years ... I'm hoping to find the cheapest one possible so I can use the Dot and these speakers in my home gym. No features, etc., just a powered amp to act as a middleman.

Offline jwlv

  • *
  • 1487
Re: Cheapest way to connect speakers?
« Reply #4 on: February 10, 2019, 05:38:56 pm »
By the time you get an amp and speakers all hooked up, you'd be better off getting a full sized Echo 2 that has a decent speaker built in. Echo 2 is $69.99 right now on Amazon. I don't think you'll do much better than that with buying a separate amp and definitely won't look as nice with cables and plugs between them.

Dermbrian

Re: Cheapest way to connect speakers?
« Reply #5 on: March 14, 2019, 10:50:59 am »
Consider the Dayton Audio DTA-1 amp.   I’m listening to an Echo Dot right now with its predecessor, a Sonic Impact “T Amp” and a couple Radio Shack Optimus Pro LX4 speakers. 

I have had bad experiences with Bluetooth on multiple Echo 2’s (search ‘glitchy’ here) with Bluetooth from my fairly recent iPhone....which works flawlessly with every other Bluetooth speaker and my car.   The first Echos and Echo Dot’s work great, but I am convinced there is a problem with the second version Echos.
« Last Edit: March 14, 2019, 10:52:46 am by Dermbrian »